Stereo Sound Layout

addtime：2017/1/9    view：2165

Speaker Installation Guide
Speaker Placement
For realizing maximum sound performance is always the goal .The pivoting tweeters in DB speakers are able to compensate for unusual placements. However,placing speakers at equal distance from the intended listening area and along a common wall is generally recommended as the ideal acoustical set-up .This helps to ensure the best stereo effect. Where the intended listening position may vary widely ,speaker placement may be wherever is most convenient.
DB custom install speakers are designed to function in any standard wall,ceiling or drop ceiling.

2 CHANNEL AUDIO PLACEMENT
In a standard two channel audio system ,the speakers should be separated approximately 6-10 feet apart .If possible,the left and
right speakers should be located at the same distance from the listening position
WIRE GAUGE AND QUALITY
The total wire resistance should be less than 10% of the speaker impedance.If using an 8 Ohm speaker,your total wire resistance   should be on more than 0.8 Ohms In simple terms,the extra resistance from the wire will have a very negative effect on the sound
quality of the speaker. The sound can be less dynamic,definition of bass frequencies can be reduced, an in extreme cases, the high frequencies can be attenuated . Amplifier power is also wasted in the wire, reducing the maximum output level of the system.Please refer to the following chart when deciding on the appropriate wire Gauge for your installations.